|
|
Search results for "Basic vacuum cup holders" Vuototecnica
|
Basic vacuum cup holders
These cup holders are built in a simple and rational way, guaranteeing maximum sturdiness and duration.
They are composed of:
- A brass stem for fastening the cup;
- A steel threaded sleeve equipped with two hexagonal nuts for a quick assembly of the cup to the machine;
- A spring for cushioning the impact of the cup, as well as for maintaining a constant pressure with the load to be lifted;
- A quick coupling for the connection to the suction hose.
The actual springing stroke is:
- For height C= 28 mm 16 mm
- For height C= 65 mm 49 mm
- For height C= 95 mm 74 mm
Product codes: 022510 023010 023510 022515 023015 022724 023024 023236 023515 024015 024510 026010 024515 025020 026528 025040 027540 0210040 0210050 025615 026515 027624 029024 0211024 028020 028510 028515 0211010 0211015
|
|
|
|
Basic vacuum cup holders for bellows cups
The actual springing stroke is:
- For height C= 28 mm 16 mm
- For height C= 65 mm 49 mm
- For height C= 95 mm 74 mm
Product codes: 022023 022219 023426 022535 023032 024042 023050 023099 023055 024030 025030 026030 028530 024050 024060 025050 026050 028550 024328 025053 025250 025335 025630 027530 027542
|
|
|
|
Basic vacuum cup holders with male and female threaded connectors
These basic vacuum cup holders also have the same characteristics and offer the same performance as those previously described. Their distinctive feature is the brass stem with a threaded male or female end for fixing the cup.
The cups to be assembled onto these vacuum cup holders must be equipped with the suited threaded support.
The actual springing stroke is:
- For height C= 28 mm 16 mm
- For height C= 65 mm 49 mm
- For height C= 95 mm 74 mm
Product codes: 020828 020865 020895 020828M 020865M 020895M 021028 021065 021095 021028M 021065M 021095M 021128 021165 021195 021128M 021165M 021195M 021228 021265 021295 021228M 021265M 021295M
|
|
|
|
Basic vacuum cup holders with plunger valve
They offer the same mechanical performance at the basic mini vacuum cup holders. They are characterised by a plunger valve solidly connected to a conical spear valve, which activates suction, and therefore creates vacuum, only when the cup comes into contact with the load to be lifted.
The actual springing stroke is:
- For height C= 28 mm 16 mm
- For height C= 65 mm 49 mm
- For height C= 95 mm 74 mm
Product codes: 034510 036010 036515 038020 038510 038515 0311010
|
|
|
|
Basic vacuum cup holders with plunger valve, with no springing
Their function is the same as the previously described basic vacuum cup holders with plunger valve but, for further bulk reduction, the cushioning spring, the threaded bush with nuts for fixing to the automation and the quick coupler have been removed. This type of cup holder must be assembled onto the vacuum manifold by means of a threaded male shank on its end.
Product codes: 034511 036011 036516 038021 038511 038516 0311011 035041 037541 0310041
|
|
|
|
Basic vacuum cup holders with built-in shut-off valve
Along with all the other features they share with the other basic vacuum cup holders, these have a built-in shut-off valve.
The function of the shut-off valve is to automatically close suction when the cup is not in contact with the surface of the load to be handled or in case of a faulty grip or of considerable transpiration, thus preventing the reduction of the level of vacuum on the remaining cups of the system that are regularly gripping a load.
The advantage of this is that the placement or the exclusion of the non-gripping cups is no longer binding.
Vacuum cups with a minimum diameter of 35 mm and maximum diameter of 85 mm can be assembled on these cup holders, provided they have a 1/4” male threaded gas support.
The actual springing stroke is:
- For height C= 28 mm 16 mm
- For height C= 65 mm 49 mm
- For height C= 95 mm 74 mm
Product codes: 029928 029965 029995
|
|
|
|
Basic articulated vacuum cup holders
The technical and mechanical features are the same as for the basic vacuum cup holders. Their distinctive feature is their articulated joint in hardened steel, which allows the flat cups installed on these cup holders to adapt themselves to the loads to be lifted with slightly tilted surfaces, as well as to compensate possible verticality errors that can arise between the cup holder and the automation fixing support.
The actual springing stroke is:
- For height C= 28 mm 16 mm
- For height C= 65 mm 49 mm
- For height C= 95 mm 74 mm
Product codes: 026520 028520 0211020 0211022
|
|
|
|
Basic anti-rotation vacuum cup holders
The technical features are the same as for the previously described basic vacuum cup holders. Their distinctive features are their brass stem with hexagonal cross-section and the steel drive bush, also with hexagonal hole.
This structure prevents the stem and, as a consequence, the cup assembled onto it from rotating on its axis.
The drive bush is equipped with two fine thread ring nuts to guarantee an accurate fastening of the cup holder to the automation. They are suited for cups with diameters between 45 mm and 110 mm, although they have been specially designed for assembling rectangular, concave or elliptical cups.
The actual springing stroke is:
- For height C= 28 mm 16 mm
- For height C= 65 mm 49 mm
- For height C= 95 mm 74 mm
Product codes: 029528 029565 029595 0295281/4 0295651/4 0295951/4
|
|
|
|
Basic vacuum cup holders fix
These are simple nickel-plated brass threaded bushes with ring nuts for height adjustment and with male and female threaded ends, one to assemble the vacuum cup with support and the other for the quick coupling connecting the suction hose.
Product codes: 029101 029105 029106
|
|
|
|
