Search results for "packaging"

Vacuum cups with two bellows for heavy-duty packaging

Specifically designed vacuum cups for tripping and handling particularly heavy boxes and cardboard packaging in general.
Their thick, sturdy lip absorbs tears and sudden accelerations, typical of robotised movements. The double bellows enables improved adaptability to the gripping surface, even if not perfectly perpendicular to the axis of the vacuum cup, and can recover evident unevenness of the loads to be lifted.
The supports, all made of anodised aluminium, are equipped with a male or female central threaded pin to allow suctioning and clamping to the automation. The vacuum cups can be fitted on them without the aid of adhesives.
To replace, simply request the single vacuum cup indicated in the table in the desired compound.
Product codes: 013527 015240 0008394 0008395 0008366 0008364 0835271/8 0852401/8 083527 085240 013527 015240 0008396 0008397 0008392 0008393 0835271/8F 0852401/8F 083527F 085240F 087543SR 0811073SR 0008373 0008372 0008376 0008375 087543M 0875433/8M 0811073M 08110731/2M 087543SR 0811073SR 0008374 0008377 0875433/8 08110731/2

Bellows cups with supports for gripping flow packs

Thanks to their specific conformation and flexibility, the vacuum cups illustrated and described on this page are especially suitable for installation on automatic, high production machines in the packaging sector, and for the gripping and handling of flow packs.
The vacuum cups are available in different compounds for food use and can be cold fitted on their special supports without the aid of adhesives. Upon request, these cups can be provided upon request in minimum quantities and in other special compounds, listed on top, to be defined in the order.
Product codes: 012030S 013045S 014055S 015065S 000818 0008127 0008474 0008475 082030S 083045S 084055S 085065S

Multi-function modules with built-in vacuum solenoid valves

The needs of technical designers in the packaging sector and in the automation sector in general to have more vacuum combined with different functions in the smallest possible space has led us to design and implement this new series of multi-function modules.
Each module has two internal solenoid valves built inside it. Their ducts house the seats for the flow control valves, which can be operated externally by means of special knobs. Various connections made at different points allow for connection of the module to instruments for reading and checking the level of vacuum, such as vacuum gauges, vacuum switches, transducers, etc.
There are three modules currently available:
- Module A: the basic module with two integrated 1”1/2 and 1” solenoid valves, two flow regulators and several additional connections.
- Module B: with two integrated 1/2 "and 1" solenoid valves and two flow regulators. Can be combined with modules A and C.
- Module C: module with two integrated 1/2” solenoid valves, a flow regulator and an additional connection.
Can be combined with module A or B.
The combination of modules A, B and C, feasible using special stainless steel tie-rods, allows for the application of various functions from a single source of vacuum, as well as allowing for the elimination of numerous pipes and fittings, often causing leaks. The multi-function modules are supplied already tested to a guaranteed final level of vacuum of 0.5 mbar and perfectly sealed.
The technical characteristics are those of the pneumatically actuated three-way vacuum solenoid valves:
- Servo-control pressure: 6-7 bar; 4-6 bar for version LP, with non-lubricated compressed air, 5 micron filtration, according to standard ISO 8573-1 class 4
- Operating pressure: from 0.5 to 3000 absolute mbar
- Electric coils: fully plastic-coated in synthetic resin, watertight, insulation class F (up to 155°C) as per standard VDE, with 3 mm two-terminal electrical connections for connectors in compliance with EN 175301-803
- Protection degree IP 54; IP 65 with connector inserted.
- Tolerance permitted on the nominal voltage value: ± 10%
- Electrical power of the coils: from 1 to 2 W, depending on the electrical voltage
- Temperature of suctioned fluid: from – 5 to + 60°C
The ideal use of these multi-function modules is on vacuum thermoformers and vacuum thermo-welders, but they are also widely used on packaging and filling machines in the packaging sector and in all those cases where it is necessary to manage the vacuum at different points and times. Upon request, the modules can be customised and implemented with solenoid valves up to 3” gas. Contact our technical department for further information.

Cartridge vacuum generator PVR 3 OT

Also the construction of this cartridge vacuum generator was necessary in order to meet the demand for ever smaller and more performing devices in the packaging sector.
The compressed air supply pressure is between 1 and 3 bar, while the maximum level of vacuum is -52 KPa, with a flow rate of 2.6 m3/h.
Also the shape of these generators, like the previous ones described, allows for the suction of dust and small processing waste without clogging problems.
They are made of brass as standard, but upon request they can also be supplied in different metals.
Product code: PVR3OT

Cartridge vacuum generators PVR 1 and PVR 4

These small cartridge vacuum generators can be integrated directly into the gripping elements of packaging machines.
The maximum yield is offered at low compressed air pressures of 2-3 bar, providing levels of vacuums up to -72 KPa and flow rates between 1 and 4 m3/h.
Their particular shape permits the suction of dust or small processing residues, without creating clogging problems.
They are made as standard in anodised aluminium but can also be supplied in stainless steel, upon request.
Product codes: PVR1 PVR4

Term of sale

The following conditions are considered accepted by the customer when ordering.

• ORDERS: upon transmission of the order, all the current sales conditions are considered approved by the customer, unless special agreements have been accepted by the contracting parties. The item code must be specified in the order.
  
  
  
• PRICES: prices are intended for goods delivered ex our warehouse (VAT, packaging and transport not included); those in force when ordering will be considered valid.
  
  
• PACKAGING: free for accessories, at cost for pumps and pump sets.
  
  
• SHIPPING: will be carried out via parcel post or via a trusted customer courier; returns will be ex our Beverate factory and the goods will travel entirely at the risk of the customer. Therefore, in the event of delays, shortages, damage, theft, etc., complaints must be addressed to the Carrier, who is solely responsible.
  
  
• DELIVERIES: the delivery limit, if indicated, is purely indicative and therefore relieves our company of any recourse.
  
  
• COMPLAINTS: must be received in writing within 8 days from the date of receipt of goods. Complaints will not be accepted after this deadline. Complaints of any kind do not suspend the obligation to make payments in the agreed form. In the event that the goods are deemed by us to be unsuitable, the purchaser has the right solely to replace the goods or a credit in the amount. Any other type of compensation is considered of no value. For any dispute and controversy, the only competent court shall be that of the Court of Lecco.
  
  
• RETURNS: any replacement or return must be authorised in advance with a return number. The authorisation number must be clearly indicated on the delivery note. The goods will be accepted for return only if sent carriage paid and subject to verification upon arrival at the warehouse. Return credits will be made at the purchase price. The materials returned due to an incorrect order will be subject to a flat-rate charge of €25.00 for management fees.
  
  
• PAYMENTS: must be made exclusively to our headquarters, according to the agreed specifications. In the event of late payment, statutory interest will be debited from the agreed expiration date until the payment is made and, at the same time, any orders in progress will be suspended.
  
  
• PRODUCT FEATURES: the images and technical information contained in the production catalogue are subject to change; therefore, our company reserves the right to make modifications without prior notice.
  FULL OR PARTIAL REPRODUCTION OF THE CATALOGUE IS PROHIBITED.
  
  
• ORDER VALUE: We do not accept orders for values less than €300.00.

Any clause contained in the customer order which is in contrast with the above shall be considered of no value.