|
Search results for "articulated vacuum cup holders"
| |
Basic articulated vacuum cup holders
The technical and mechanical features are the same as for the basic vacuum cup holders. Their distinctive feature is their articulated joint in hardened steel, which allows the flat cups installed on these cup holders to adapt themselves to the loads to be lifted with slightly tilted surfaces, as well as to compensate possible verticality errors that can arise between the cup holder and the automation fixing support.
They are composed of:
- A brass stem for fastening the cup;
- A nickel-plated steel threaded sleeve equipped with anti-friction bushes for quick assembly of the cup to the automation;
- A spring to cushion the impact of the cup and to, at the same time, maintain constant pressure with the load to be lifted;
- A quick coupling for connection with the suction hose;
- An articulated joint in galvanised steel.
Product codes: 026520 028520 0211020 0211022
|
|
|
| |
Special articulated vacuum cup holders
The distinctive feature of these cup holders is their articulated joint in hardened steel, which allows the flat cups installed on these cup holders to adapt themselves to the loads to be lifted even if not completely parallel with the cup plane, as well as to compensate possible verticality errors that can arise between the cup holder and the automation fixing support. Their technical and mechanical features are the same as the other previously described special vacuum cup holders.
They are composed of:
- A nickel-plated steel stem for fastening the vacuum cup;
- A threaded brass bush, equipped with two anti-friction bushings, fitted with two ring nuts for fastening the vacuum cup holder to the automation;
- A spring to cushion the impact of the cup with the load to be lifted;
- A safety washer;
- A quick coupling for connection with the suction hose;
- An articulated joint in galvanised steel.
Product codes: 0611012 0611017 0615012 0615017 0620012 0625012 0622012OF 0622012NF 0622012A 0630012 0635012 |
|
|
| |
Special articulated vacuum cup holders with compact stroke
Marble and glass slabs are handled using vacuum cups that move them between horizontal and vertical positions. To reduce the lever arm and slippage during rotation, special articulated vacuum cup holders with reduced springing have been developed.
These retain the same technical characteristics as the previous models, but with much smaller dimensions thanks to the integration of the articulated joint in the vacuum cup support, the reduction of the steel stem and the modification of the brass bush in order to allow it to be screwed directly onto the automation. Finally, a non-slip plastic coating attached to the support prevents the lifted load from slipping.
They are composed of:
- A steel stem with a spherical part;
- A threaded brass bush for fastening the vacuum cup holder to the automation;
- A spring to cushion the impact of the cup and to, at the same time,
maintain constant pressure with the load to be lifted;
- A 90° swivel quick coupling for connection with the suction hose; - An aluminium support for mounting the vacuum cup, equipped with a spherical seat and vacuum connection;
- Non-slip plastic coating.
Product codes: 0611042 0612742 0615042 |
|
|
| |
Special articulated vacuum cup holders with double springing
The distinctive feature of these cup holders is their articulated joint in hardened steel, which allows the flat cups installed on these cup holders to adapt themselves to the loads to be lifted even if not completely parallel with the cup plane, as well as to compensate possible verticality errors that can arise between the cup holder and the automation fixing support.
The cup holder fixing bush is located between two springs: the lower one cushions the impact of the cup with the load to be lifted during the approach phase, while the upper one cushions the impact of the bush with the cup holder end and gradually loads the cup during the lifting phase.
These cup holders are especially recommended when the load to be lifted is very heavy, rough or not perfectly flat.
They are composed of:
- A nickel-plated steel stem for fastening the vacuum cup;
- A threaded brass bush, equipped with two anti-friction bushings, fitted with two ring nuts for fastening the vacuum cup holder to the automation;
- Two springs designed to reduce and distribute impact: one serves to cushion the impact of the vacuum cup with the load to be lifted, the other to cushion the impact of the bush against the end of the vacuum cup holder;
- A safety washer;
- A quick coupling for connection with the suction hose;
- An articulated joint in galvanised steel.
Product codes: 0611014 0611018 0615014 0615019 0620014 0625014 0622014OF 0622014NF 0622014A 0630014
|
|
|
| |
Special vacuum cup holders with built-in joint
These special articulated vacuum cup holders have an articulated joint housed in the cup support. This has allowed a reduction of the overall dimensions without affecting performance.
They are composed of:
- A nickel-plated steel stem with articulated joint
- A threaded brass bush, equipped with two anti-friction bushings, fitted with two ring nuts for fastening the vacuum cup holder to the automation
- A spring to cushion the impact of the cup with the load to be lifted
- A safety washer
- A quick coupling for connection with the suction hose
- An aluminium support for mounting the vacuum cup, equipped with a vacuum connection
Product codes: 0611032 0615032
|
|
|
|
